Advanced Hookups - Sony SLV-D983P Service Manual

Press V/v to select the row which you want to change or enter
4
the station name, then press b.
To display other pages for programme positions 6 to 80, press
V/v repeatedly.
Press V/v to select "NAME," then press b.
5
6
Enter the station name.
Press V/v to select a character.
1
Each time you press V, the character changes as shown
below.
A t B t ... t Z t 0 t 1 t ... t 9 t – (space)
t A
Press b to set the next character.
2
The next space flashes.
To correct a character, press B/b until the character you want to correct flashes, then
reset it.
You can set up to 4 characters for the station name.
7
Press ENTER to confirm the new name.
Press O RETURN, then press SET UP to exit the menu.
8
26
Presetting channels
A Use this hookup if your TV has an S-VIDEO input jack
Connect an S-VIDEO cord (not supplied). You will enjoy high quality images.
B Use this hookup if your TV has component video input jacks
Connect a component video cord (not supplied) or three video cords (not supplied) of
the same kind and length. You will enjoy accurate color reproduction and high
quality images.
If your TV accepts progressive (525p/625p) format signals, you must use this
connection and then set "Progressive" to "On" in the "SCREEN SETUP" menu. For
details, see "To set the "Progressive" setting" (page 59).
Notes
• The connection using S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only for
the DVD player. The signal from the VCR will not be output.
• In the connection using S-VIDEO OUT jack, if you set "Progressive" to "On" in the
"SCREEN SETUP" menu, S-Video playback may be distorted.
28
S-Video/Component Video hookup

Advanced Hookups

MANUAL TUNING S-Video/Component Video hookup
PR : 5
CH : 33
MFT : –
NAME : – – – –
v V b B MEMORY : ENTER
Select one of the following patterns A or B, according to the input jack on your TV monitor,
RETURN
projector, or AV amplifier (receiver). You can enjoy higher quality images when playing DVDs.
Make audio connections using the LINE OUT AUDIO L/R jacks or DIGITAL AUDIO OUT
MANUAL TUNING
PR : 5
(COAXIAL) jacks on the right side of the DVD-VCR when you use S-VIDEO/Component
CH : 33
Video hookup. See page 29 for audio connections.
MFT : –
NAME : – – – –
If your TV accepts progressive (525p/625p) format signals, you must use the connection B.
v V b B
MEMORY : ENTER
RETURN
MANUAL TUNING
PR : 5
CH : 33
MFT : –
NAME : O – – –
v V b B
MEMORY : ENTER
RETURN
A/V Receiver hookup
Select one of the following patterns A or B, accordiing to the input jack on your AV amplifier
(receiver). This will enable you to listen to DVD audio tracks through your AV amplifier
(receiver).
For correct speaker location, see the operating instructions supplied with the connected
components.
to LINE OUT L/R (AUDIO)
l : Signal flow
Front (L)
Center
1-6
DVD-VCR
LINE OUT COMPONENT VIDEO OUT
R
C
R
AUDIO
L
C
B
COAXIAL
Y
to COMPONENT
(green) (blue) (red)
VIDEO OUT
S-VIDEO cord
(not supplied)
TV
Component video
cord (not supplied)
l : Signal flow
(DVD only)
Stereo audio cord
(red)
(not supplied)
LINE OUT COMPONENT VIDEO OUT
R
C
R
AUDIO
L
C
B or
COAXIAL
(white)
Y
(white) (red)
to audio input
[Speakers]
Rear (L)
AV amplifier (receiver)
with a decoder
to S-VIDEO OUT
TV
continued
27
S-Video/Component Video hookup
DVD-VCR
to DIGITAL AUDIO
OUT (COAXIAL)
Coaxial digital cord
(not supplied)
to coaxial digital input
[Speakers]
Rear (R)
Front (R)
Subwoofer
continued
29
A/V Receiver hookup