Sony SLV-D983P Service Manual page 13

B Use this hookup if your TV has a Scart (EURO-AV) connector
AERIAL IN
Aerial cable (supplied)
Scart
(EURO-AV)
Scart cable (not supplied)
: Signal flow
1
Disconnect the aerial cable from your TV
and connect it to on the rear panel of
the DVD-VCR.
2
Connect of the DVD-VCR and the
aerial input of your TV using the supplied
aerial cable.
3
Connect LINE-1 (EURO AV) on the
DVD-VCR and the Scart (EURO-AV)
connector on the TV with the Scart cable.
4
Connect the mains lead to the mains.
If you connect additional equipments to the DVD-VCR (page 15, 27, 29), be
sure to connect the mains lead after all comections are completed.
14
Connecting the DVD-VCR
Step 4 : Setting up the DVD-VCR with the
Auto Set Up function
Before using the DVD-VCR for the first
time, set up the DVD-VCR using the Auto
Set Up function. With this function, you can
set TV channels, guide channels for the
VIDEO Plus+ system, and DVD-VCR clock
automatically.
Before you start...
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote (page 10).
1
Turn on your TV and set it to the video channel.
2 Connect the mains lead to the mains.
The DVD-VCR automatically turns on and the
DVD-VCR starts searching for all of the
receivable channels and presets them (in the
appropriate order for your local area).
If you want to change the order of the channels
or disable unwanted programme positions, see
"Changing programme positions" on page 23 or
see "Disabling unwanted programme positions" on page 24.
After the search is complete, the current time appears for any stations that
transmit a time signal. If the time does not appear, set the clock manually.
See "Setting the clock" on page 19.
16
Setting up the DVD-VCR with the Auto Set Up function
LINE-1
Mains lead
(EURO AV)
to mains
SET UP
V/v/B/b
ENTER
AUTO SETUP
Please wait 10%
RETURN SET UP
1-3
Connecting to a satellite or digital tuner
Connect a satellite or digital tuner to this DVD-VCR using the LINE-3 jack.
LINE-3
AERIAL IN
Aerial cable (supplied)
Scart
(EURO-AV)
Scart cable (not supplied)
: Signal flow
To a satellite or digital tuner with Line Through
When you connect the DVD-VCR to your TV via the SCART jacks, you can watch
programmes from a satellite or digital tuner connected to this DVD-VCR on the TV
even when the DVD-VCR is turned off. When you turn on the satellite or digital
tuner, this DVD-VCR automatically sends the signal from the satellite or digital tuner
to the TV without turning itself on.
Notes
• This function may not work with some types of satellite or digital tuners.
• When the DVD-VCR is turned off, set the TV to the video channel.
• The Line Through function will not operate properly if "Power Save" in "OPTION" menu is
set to "On." Set "Power Save" to "Off" to ensure proper operation.
• The Line Through function will not operate when you make the connection using an audio/
video cord.
To cancel the Auto Set Up function
Press SET UP.
Tip
• If you want to change the language for the on-screen display from the one preset in the Auto
Set Up function, see page 18.
Notes
• Whenever you operate the Auto Set Up function, some of the settings (VIDEO Plus+, timer,
etc.) will be reset. If this happens, you have to set them again.
• Auto preset starts automatically only when you plug in the mains lead for the first time after
you purchase the DVD-VCR.
• If you want to use the Auto Set Up function again, select "Install" in the "OPTION" menu,
then press V/v to select "Auto Setup."
• Auto preset can be performed by pressing x on the unit continuously for 5 seconds or more
during power off with no tape inserted.
Setting up the DVD-VCR with the Auto Set Up function
Scart cable
(not supplied)
Scart
(EURO-AV)
LINE-1 (EURO AV)
15
Connecting the DVD-VCR
17