Connect the device to external AC power under any of the following conditions:
When charging the battery
●
When installing or modifying system software
●
When performing a backup or recovery
●
When you connect the device to external AC power, the following events occur:
The battery begins to charge.
●
The device turns on.
●
The power meter icon in the status area changes appearance.
●
When you disconnect external AC power, the following events occur:
The device switches to battery power.
●
The power meter icon in the status area changes appearance.
●
Testing an AC adapter
Test the AC adapter if the device does not turn on when it is connected to AC power.
To test the AC adapter:
1.
Connect the AC adapter to the device, and then plug it into an AC outlet.
2.
Monitor the device for one of the following statuses:
If the power status light turns on, the AC adapter is working properly.
●
If the device turns on, the AC adapter is working properly.
●
If the power light remains off and the device remains off, the AC adapter is not functioning and
●
should be replaced.
Contact support for information on obtaining a replacement AC power adapter.
40
Chapter 12 Power management