Powerplant Limitations; Engine; Operating Limits; Approved Oils - Cirrus SR22T Pilot Operating Handbook

Section 2
Limitations

Powerplant Limitations

Engine

Number of Engines.............................................................................. 1
Engine Manufacturer ........................................... Teledyne Continental
Engine Model......................................................................TSIO-550-K
Engine Type..........Turbocharged, direct drive, fuel injected, air cooled,
horizontally opposed 6 cylinder engine with 550 cubic inch
displacement.
Horsepower Rating.............................................. 315 bhp @ 2500 rpm
Oil Temperature ............................................. 240°F (116°C) maximum
Minimum Oil Temperature for Takeoff ................................ 75 F (24 C
Oil Pressure:
Minimum................................................................................ 10 psi
Maximum............................................................................. 100 psi

Operating Limits

Do not reduce manifold pressure below 15 inches when above 18,000
ft MSL.

Approved Oils:

Engine Break-In: For first 25 hours of operation or until oil
consumption stabilizes use straight mineral oil conforming to MIL-
C-6529. If engine oil must be added to the factory installed oil, add
only MIL-C-6529 straight mineral oil.
After Engine Break-In: Use only oils conforming to Teledyne
Continental Specification SAE J 1899 (Ashless Dispersant
Lubrication Oil).
All Temperatures ............................... 15W-50, 20W-50 or 20W-60
Above 40°F (4°C) .................................SAE 50, 20W50, or 20W60
Below 40°F (4°C) ................... SAE 30, 10W30, 15W50, or 20W50
2-6
Cirrus Design
SR22T
P/N 13772-005

Original Issue