Dell DL1000 Deployment Manual page 35

Deploying to machines on an Active Directory domain
Use this procedure to simultaneously deploy the Rapid Recovery Agent software to one or more
machines on an Active Directory domain.
Before you begin this procedure, have the domain information and logon credentials for the Active
Directory server on hand.
1. On the Rapid Recovery Core Console, click the Protect drop-down menu, and then click Deploy
Agent Software.
The Deploy Agent Software Wizard opens.
2. On the Connection page of the wizard, from the Source drop-down list, select Active Directory.
3. Enter the domain information and logon credentials as described in the following table.
Table 4. Domain information and credentials
Text Box Description
Host The host name or IP address of the Active Directory domain.
User name The user name used to connect to the domain; for example, Administrator or, if
the machine is in a domain, [domain name]\Administrator).
Password The secure password used to connect to the domain.
4. Click Next.
5. On the Machines page, select the machines to which you want to deploy the Rapid Recovery Agent
software.
6. Optionally, to automatically restart the protected machines after the Agent is installed, select After
Agent installation, restart the machines automatically (Recommended).
7. Click Finish.
The system automatically verifies each machine that you selected.
If Rapid Recovery detects any concerns during automatic verification, the wizard progresses to a
Warnings page, where you can clear machines from selection and manually verify the selected
machines. If the machines you added pass the automatic verification, they appear on the Deploy
Agent to Machines pane.
8. If the Warning page appeared and you are still satisfied with your selections, click Finish again.
The Rapid Recovery Agent software deploys to the specified machines. The machines are not yet
protected. To protect machines, see the topic "Protecting multiple machines on the Active Directory
domain" in the Rapid Recovery 6.0 on DL Appliances User's Guide.
Deploying to machines on a VMware vCenter/ESX(i) virtual host
Use this procedure to simultaneously deploy the Rapid Recovery Agent software to one or more
machines on a VMware vCenter/ESX(i) virtual host.
Before starting this procedure, you must have the following information:
• Logon credentials for the VMware vCenter/ESX(i) virtual host.
• Host location.
• Logon credentials for each machine you want to protect.
35