PRESONUS ADL 700 Owner's Manual page 16

2.8 Stereo Linking Two ADL 700s
3. The Link LED will illuminate when Stereo Link
mode is enabled.
5
5. Use the Threshold, Attack, Release, and Ratio
controls on the master unit to adjust the compres-
sor setting for both units. Adjust the Make-up
Gain as necessary on both units.
12
.
4. The compressor controls on the slaved unit will
no longer have any effect on the audio.
6
6. When you want to disable Stereo Link mode,
simply turn the Threshold knob on the slaved
unit to any position other than ST. You do not
have to disconnect the TRS connection to disable
Stereo Link mode.
ADL 700