Vu Meter And Controls - PRESONUS ADL 700 Owner's Manual

Owner's Manual
2.4

VU Meter and Controls

High Mid Band Gain: Sets the attenuation or boost of the EQ's high-mid band. The
gain can be set between -16 and +16 dB.
High Band Frequency: Sets the center frequency of the EQ's high-frequency band.
You can adjust the center frequency from 2 kHz to 20 kHz.
High Band Gain: Sets the attenuation or boost of the EQ's high band. The gain can be
set between -16 and +16 dB.
High Band Peak: When the Peak switch is engaged, the high band of the EQ
becomes a standard peak filter with a fixed Q of 0.6. When it is disengaged, the high
band is a shelving filter.
Meter -6 dB: This switch offsets the VU meter by 6 dB, which can help you meter loud
input sources if your VU meter is "slamming" or pegged.
VU Meter: The analog VU meter displays the ADL 700's
output level. When the Meter – GR switch is enabled, the
VU meter will show the amount of gain reduction being
applied by the compressor.
VU Meter and Controls 2.4
7
English
Español
Deutsch
Français