SkyZone SKY01S User Manual

SkyZone SKY01S User Manual

Fpv goggles

Advertisement

 
 
 
SKYZONE
 
SKY01S
 
FPV GOGGLE   
USER MANUAL 
 
 
 
 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SKY01S and is the answer not in the manual?

Questions and answers

Summary of Contents for SkyZone SKY01S

  • Page 1                         SKYZONE         SKY01S   FPV GOGGLE    USER MANUAL           ...
  • Page 2 System Content                                                                                           ...
  • Page 3: Quick Start

        Operation Guide SKY01S FPV glasses are inbuilt with two 5.8GHz receiving modules, two antenna ports and Binocular Display modules, 5.8GHz receiving work in diversity mode. supports 6 bands and 48 channels (see the Specifications Description for details). Quick Start Preparation ·...
  • Page 4 · Long press the <Search> button to pop up the channel search menu. · press the <Search> button to execute channel search (repeatable). Channel search is conducted from low frequency to high frequency. After 40 channels are searched, the device will work at the strongest channel.
  • Page 5: Front Camera

    RF Mode · Press the <CHANNEL> button to adjust channels and <BAND> button to adjust bands in circular manner, then the screen will display BAND, CH and frequency. Front Camera · The font camera of such FPV glasses has VGA resolution and good low illuminance, enabling to easily observe surroundings very easily without taking off the glasses.
  • Page 6: Firmware Upgrade

    Firmware upgrade  In off state, hold the VOL+ key and power on, then the system will enter the upgrade mode, · Connect one end of the special upgrade cable to PC and the other end to the AV IN socket, ·...

Table of Contents