Hdd And Discs; Fr; When Remove A Recorded Disc - Panasonic DMR-EH75V Operating Instructions Manual

The unit automatically selects a recording rate between XP and EP
(8H) that will enable the recordings to fit in the remaining disc space
with the best possible recording quality.
oYou can set FR (Flexible Recording) mode when copying (4 59,
60, 64) or programming scheduled recordings (4 36, To make
scheduled recording) or Flexible recording (4 30).
• Using "Flexible Recording" is convenient in
these kinds of situations.
eWhen the amount of free space on the disc makes selecting an
appropriate recording mode difficult
oWhen you want to record a long program with the best picture
quality
oWhen you want to record a title to HDD so that it can then be
copied to fit one 4.7 GB disc perfectly.
You do not need to edit the recorded title, or change the recording
mode when copying, to fit the disc space.
e.g., Recording a 90 minutes program to disc
If you select XP mode, the program will not fit one disc.
A second disc is necessary for
30 minutes of the program.
Another disc is necessary.
If you select SP mode, the program will fit one disc.
However there will be 30 minutes
remaining disc space.
If you select "Flexible Recording" the
program will fit one disc perfectly.
When you insert a new disc or a disc recorded on a computer or
other equipment, a format confirmation screen is displayed. Format
the disc to use it. However, all the recorded contents are deleted.
Press [41] to select "Yes" and then press [ENTER].
• Several steps are necessary to format a disc. Refer to "Deleting all
the contents of a disc or card--Format" (4 71 )
When you press [A_, OPEN/CLOSE] on the main unit while stopped:
The following screen appears when you have not processed the disc
for play on other equipment.
• When finalizing the disc
Press [O, REC] on the main unit.
oYou cannot stop this process once you have started it.
olf you want to set the background, play menu select or providing a
disc name, select "Top Menu Style", "Playback will start with:"
(4 72) or "Disc Name" (4 70) in "DVD Management" before
finalizing.
• When opening the tray without disc finalization
Press [__, OPEN/CLOSE] on the main unit.
1 Sec. Quick Start for & EPG I
]
Recording Display
J
(When connecting to a TV using the Video or S-Video terminal)
From the power on state, recording starts about 1 second" after
[O, REC] is pressed. If [TV GUIDE] is pressed while the unit is off, the
Electronic Program Guide (EPG) starts being displayed in less than
1 second, with the full EPG being displayed in about 1.5 seconds.
+ Only when recording to the HDD or DVD-RAM
RQT8346