Whirlpool BHDH2500AS1 Use & Care Manual page 11

Top flange screws
A
Fan
motor
oil
tubes
l
Remove the top flange ecrews.
l
For 25,30,40 and 50 pint modeis:
Remove the rear grille. Pull down at bottom
and drop grille down.
l
Lii cabinet from base.
3. Coils should be inspected annually. Brush
clean, if necessary, with warm water and mild
detergent. Rinse and dry thoroughly. Be sure
power supply cord is disconnected from
reeelptaclr
4. The compressor is sealed and needs no oiling.
The fan motor is preiubricated and does
not require further oiling under normal
operating conditions. However, if the
dehumidifier is operated under severe
environmental conditions (dust, dirt, high
temperatures) the fan motor should be oiled
annually. Follow the instructions in step 5.
5. Oil the motor through the tubes provided. Use
SAE %20 grade oil.
6. Wash plastic parts with a soft cloth, warm
water and mild detergent. Rinse and dry with a
soft cloth.
7. Replace cabinet and grilles.
8. Reconnect power supply cord.
11