Garmin Varia Quick Start Manual page 16

2 Place the universal mount on the seat post.
3 Attach the universal mount securely using
one band
4 Align the tabs on the back of the device
with the universal mount notches
5 Press down slightly and turn the device
clockwise until it locks into place.
Installing the Seat-Post Mount
1 Use the hex key to remove the screw
from the seat-post connector
2 Place a rubber pad around the seat post, if
necessary:
• If the seat post diameter is from 27 to
28.6 mm, use the thicker pad.
Instructions
2
.
3
.
1
2
.
15
EN