Marantz AV7703 Owner's Manual page 302

Contents Connections
Upgrade (Auro-3D)
Sound mode
Front
L/R
Auro-3D S
Auro-2D Surround S
z1 The applicable sound mode includes "Dolby Surround" and sound modes that have "+Dolby Surround" in the sound mode name.
z2 The applicable sound mode includes "DTS Neural:X" and sound modes that have "+Neural:X" in the sound mode name.
z3 A signal for each channel contained in an input signal is output as audio.
z4 Audio is not output when "Speaker Config." - "Surr. Back" in the menu is set to "1 spkr". (v p. 225)
z5 Audio is output from the speakers specified in the "Surround Parameter" – "Speaker Select" settings. (v p. 179)
z6 Audio is output when "Subwoofer Mode" in the menu is set to "LFE+Main". (v p. 232)
z7 For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup in
place of Surround Height speakers.
z8 This is output if an Auro-3D signal is input and the input signal contains Top Surround.
Front panel Display
Playback
Surround Front
Surround
Center Back Height
L/R
L/R L/R
D D D
D D D
Rear panel
Settings
Channel output
Rear
Top Front Top Middle Top Rear
Height
L/R L/R L/R
L/R
Dz7
302
Remote
Tips Appendix
Front Surround
Surround Dolby Dolby
Top
Height Atmos Atmos
Surround
L/R Enabled Enabled
L/R L/R
D Dz8
Index
Back Dolby
Atmos
Subwoofer
Enabled
L/R
D
D