Select the height, ceiling, or Dolby Atmos Enabled speaker location.
The layouts that can be selected differ depending on the combinations of "Assign Mode" and "Floor" - "Layout" in the menu. ("Assign
Mode" (v p. 217), "Floor" - "Layout" (v p. 218))
Height Speakers
Dolby Speakers
None
2ch
4ch
None
z1 This can be selected when "Assign Mode" is set to "11.1ch", when "Assign Mode" is set to "9.1ch (Bi-Amp)" and "Pre-out for Bi-Amp" is set to "SURROUND BACK" or
when "Assign Mode" is set to "9.1ch + Front B" and "Pre-out for Front B" is set to "SURROUND BACK" in the menu.
z2 This can be selected when "Floor" - "Layout" is set to "5ch & SB" in the menu.