Saving, Displaying And Deleting Measurements - Beurer BC 40 Instructions For Use Manual

and diastole in the ‚Normal' category), the graphical classi-
fication on the device always shows the higher category; for
the example given this would be ‚High normal'.
Blood pressure Systole
value category (in mmHg)
Setting 3:
severe hyper- ≥ 180
tension
Setting 2:
moderate hyper- 160 – 179 100 – 109
tension
Setting 1:
140 – 159 90 – 99
mild hypertension
High normal 130 – 139 85 – 89
Normal 120 – 129 80 – 84
Optimal < 120
Source: WHO, 1999 (World Health Organization)
6. Saving, displaying and deleting
measurements
The results of every successful measurement are stored
together with the date and time. If there are more than 60
measurements, the oldest measurements are lost.
Diastole
Action
(in mmHg)
seek medical atten-
≥ 110
tion
seek medical atten-
tion
regular monitoring
by doctor
regular monitoring
by doctor
self-monitoring
< 80 self-monitoring
• To access the memory recall mode, press the
memory button M.
Your last measurement will appear on the display.
Displaying average values
• Press the memory button M.
A flashes on the display.
The average value of all saved measurements is
displayed.
• Press the memory button M.
AM flashes on the display.
The average value of the morning measure-
ments for the last 7 days is displayed (morning:
5.00 a.m. – 9.00 a.m.).
• Press the memory button M.
PM flashes on the display.
The average value of the evening measurements
for the last 7 days is displayed (evening: 6.00
p.m. – 8.00 p.m.).
23