Table of Contents
Advertisement
Available languages
Available languages
GB - ENGLISH
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new POWERMATIC-machine. This manual
has been prepared for the owner and operators of a POWERMATIC 4224B wood lathe to promote safety during installation,
operation and maintenance procedures. Please read and understand the information contained in these operating instructions
and the accompanying documents. To obtain maximum life and efficiency from your machine, and to use the machine safely,
read this manual thoroughly and follow instructions carefully.
...Table of Contents
2. POWERMATIC Warranty
Changing spindle speeds
Headstock rotation
Pulley drive lubrication
1. Declaration of conformity
On our own responsibility we hereby declare that this
product complies with the regulations* listed on page 2.
Designed in consideration with the standards**.
2. POWERMATIC Group Warranty
The POWERMATIC Group makes every effort to assure
that its products meet high quality and durability standards
and warrants to the original retail consumer/purchaser of
our products that each product be free from defects in
materials and workmanship as follows:
2 YEAR LIMITED WARRANTY ON ALL PRODUCTS
UNLESS SPECIFIED OTHERWISE.
This Warranty does not apply to defects due to directly or
indirectly misuse, abuse, negligence or accidents, normal
wear-and-tear, repair or alterations outside our facilities, or
to a lack of maintenance.
The POWERMATIC group limits all implied warranties to
the period specified above, from the date the product was
purchased at retail.
To take advantage of this warranty, the product or part
must be returned for examination, postage prepaid, to an
authorized repair station designated by our office.
Proof of purchase date and an explanation of the
complaint must accompany the merchandise.
If our inspection discloses a defect, we will either repair or
replace the product, or refund the purchase price if we
cannot readily and quickly provide a repair or replacement,
if you are willing to accept a refund.
We will return repaired product or replacement at
POWERMATIC'S expense, but if it is determined there is
no defect, or that the defect resulted from causes not
within the scope of POWERMATIC'S warranty, then the
user must bear the cost of storing and returning the
product.
The POWERMATIC Group reserves the right to make
alterations to parts, fittings, and accessory equipment
which they may deem necessary for any reason
whatsoever.
3. Safety
3.1 Authorized use
This wood lathe is designed for turning wood only.
Machining of other materials is not permitted and may be
carried out in specific cases only after consulting with the
manufacturer.
The workpiece must allow to safely be loaded and
supported.
The proper use also includes compliance with the
operating and maintenance instructions given in this
manual.
The machine must be operated only by persons familiar
with its operation and maintenance and who are familiar
- Quick Links:
- Technical Data
Hide quick links:
Advertisement
Chapters
Table of Contents
