Advertisement
XV-Cl
ou
UV-RADIATION PRECAUTION
The light source,
metal halide lamp, in the LCD
projector emits small amounts of UV-Radiation.
To ensure safety please adhere to the following:
1. Be sure to wear sun-glasses
when servicing
the
projector with the lamp
turned "on" and the top
enclosure removed.
2. Do not operate the lamp outside of the lamp housing.
3. Do not operate
for more than 2 hours
with the
enclosure removed.
UV-Radiation and Medium Pressure
'
Lamp Precautions
1. Be sure to disconnect
the AC plug when replacing
the lamp.
2. Allow
one hour for the unit to cool down before
servicing.
3. Replace
only
with
same
type
lamp.
Type
CLMPF0053DE05
rated 65V/155W.
4. The lamp emits small amounts
of UV-Radiation,
avoid direct-eye contact.
5. The medium
pressure
lamp
involves
a risk of
explosion.
Be sure to follow installation
instructions
described
below and handle the lamp with care.
-W Lamp Replacement
Note:
Since the lamp reaches a very high temperature
during
units operation
replacement
of the lamp
should be done at least one hour after the power
has been turned off. (to allow the lamp to cool off.)
Installing the new lamp, make sure not to touch the
lamp (bulb) replace the lamp by holding its reflector
0
[Use original replacement only.]
DANGER
! -
Never turn the power on without the
lamp to avoid electric-shock or damage of the devices
since the stabilizer
generates
high voltages
at its
start.
4
Advertisement
