Charging; Security Code; Phone Password - Zte E821S User Manual

E821S User Manual

Charging

Your phone is powered by a rechargeable battery. The battery is not fully charged when first unpacked,
but there may be enough power to power on your phone. You should use it up completely before charging
the battery for the first three times. Charge the battery with the procedure indicated below.
1. Open the USB jack cover on the side of the phone and connect the USB charger, making sure it's
inserted the right way round. Don't try and force it in.
2. Connect the charger to a standard AC outlet.
3. Remove the charger from both the AC outlet and the phone once the charging is completed.
Notes:
The phone automatically switches off if the battery power is too low.
If you are not going to use the battery for a long time, remove it from the phone and store it in a cool dry
place.
The battery will be fully charged for 3~4 hours.
Charging is only possible within a temperature range of 0℃ to 45℃.
If the phone is over-used in shortage of battery or not used for a long time, the screen may not display
the charge indicator until it is charged for 10 to 40 minutes.
To charge the battery, you can use the provided charger or the USB data cable from your computer.

Security Code

Phone Password

Phone password can protect your handset efficiently and avoid illegal usage. If phone password protection
is activated, you should input the correct password at handset start-up.
For a new bought handset, the protection function is not activated and the default password is 0000.
•
In standby mode, select Main Menu > Settings > Security Settings > Lock Settings > Lock Setings to
•
start or stop password protection.
In standby mode, select Main Menu > Settings > Security Settings > Change Codes > Phone
•
Password to change handset password. It is suggested to change the password according to your
requirement.
Confidential and Proprietary Information of ZTE CORPORATION 13