How To Use Your Charger
1. Use the DC input or AC input to power up the charger.
2. Choose the correct battery type (LiPo / LiFe) by pressing
Button 1. Please refer to your battery charging guidelines.
3. Choose a current rate for your battery using Button 2.
Please see top of page 7 for battery charging guidelines.
Button 1: Switches battery type from LiPo to LiFe
Button 2: Changes the charge rate, 0 Amp - 6 Amp.
(Set the charge rate within 60 seconds of
plugging the battery in).
Button 3: Menu display switches between 4
different interfaces:
Interface 1:
Total Voltage, current rate/time/charging status.
Interface 2:
Individual cell voltages.
Interface 3:
Individual cell mAh input.
Interface 4:
Individual cell current rate.
4. Connect battery, the charger will identify the cell count and
begin charging automatically.
Interface 1
LiPo
0.0V0.0A
NONE
00:00:00
Interface 2
1
0.00V
3
0.00V
Interface 3
0mAh
0mAh
Interface 4
1
---A
3
---A
0689
0.00V
0.00V
0mAh
0mAh
---A
---A
PAGE 4