General Information; Connector And Cable Information - McIntosh MP100 Owner's Manual

General Information

1. For additional connection information, refer to the
until all the system components are connected
together. Failure to do so could result in malfunc-
tioning of some or all of the system's normal opera-
is active and communication is occurring between
them.
3. The Balanced and Unbalanced Outputs may be
used simultaneously, connected to different Pream-
plifiers or component recording device.
Coaxial and Optical Digital Audio Outputs are for
bels and "dB" is the abbreviation.
6. When discarding the unit, comply with local rules
or regulations. Batteries should never be
thrown away or incinerated but disposed
of in accordance with the local regulations
concerning battery disposal.
4

Connector and Cable Information

XLR Connectors
for connections:
PIN 2: + Output
PIN 3: - Output
-
Power Control (Trigger) Connectors
that signal available at the TRIG-
ger OUT Connector to control
nents. An additional connection is
for controlling the illumination of
Intosh Power Amplifiers. A 3.5mm stereo mini phone
plug is used for connection to the Power Control (Trig-
-
-
General Information and Connector Information
PIN 1 PIN 2
PIN 3
Power
Control
-
Meter
Illumination
Control
Ground
-