ASSEMBLY, CONTROLS, ADJUSTMENTS AND MAINTENANCE
HANDLEBAR
Periodically check that all adjustment nuts are tightened
and that the handlebar is properly aligned with the front
wheel.
Height adjustment
Loosen the fixing screw of the handlebar stem to the
steering seatpost.
Adjust the height of the handlebar depending on your
preference by sliding the tube inside the seatpost.
Align the handlebar perpendicularly to the front wheel.
Tighten the screw.
Height adjustment must be performed respecting MIN and MAX indications on the
WARNING
seatpost.
It is recommended that both handlebar height adjustment screw and tightening nut
for handlebar tilt adjustment are correctly tightened at a recommended torque of
18 - 20Nm.
Tilt adjustment
Loosen the tightening nut.
Turn the handlebar forward or backward depending on
your preference.
Version 1, tighten the lock nut.
Version 2, loosen the screw under the steering column
and adjust its height to suit your preference.
DE
SL
HU
EN
29