Table of Contents
Advertisement
Installation on the holder
Firmly grasp the handle at the top of the battery.
Place the external lower side of the battery on the
holder.
Set the battery permanently on its holder making sure
it is in the right position, i.e. contact surfaces between
the two elements fit together.
After verifying that the key is inserted into the key
cylinder and in vertical position (open), release the
handle at rest and constraint the battery and support
to each other, when it returns in position you will hear
a "click" that indicates the correct connection between
the elements that ensure the engagement.
Turn the key to the right and bring it to horizontal
position (closed).
Remove the key from the ignition.
BATTERY AND RECHARGE
DE
SL
HU
EN
25
Advertisement
Table of Contents
