ASSEMBLY, CONTROLS, ADJUSTMENTS AND MAINTENANCE
CONTROLS, ADJUSTMENTS AND MAINTENANCE
To maintain your electric bicycle working efficiently, you must make periodic controls on mechanical parts subject
to wear and carry out maintenance if necessary.
SEAT
Height adjustment
The various bicycle models may have different
seatpost tube fastening terminals.
Version 1, loosen the screw on the tube collar
Version 2, release the clamp lever and adjust the
height
Adjust the height depending on your height by sliding
the tube inside the tube collar.
Align perpendicularly the seat from the handlebar.
Version 1, tighten the screw on the tube collar.
Version 2, close the clamp lever
Height adjustment must be performed respecting MIN and MAX indications on the
WARNING
seatpost.
Tighten the screw on the collar of the seatpost at a recommended tightening torque
of 8 – 10Nm.
28