Stowage Dropping - ProDrone Byrd User Manual

intensity and the surface texture of articles. And the ultrasonic could not measure the distance in
certain damping materials. If both vision and ultrasonic do not work, the flight mode will be
turned into the Attitude mode automatically. Therefore, please notice the following conditions in
flight:
 The normal flight height of this system ranges from 0.2m to 6m. Please stay in this range when
the aircraft is used indoor;
 The illumination condition is 10 lux–100000 lux;
 Within the required range of the illumination conditions, all textures could be used to position
the flight except pure colors (such as pure black, pure red, pure white and pure green);
 Be cautious on the surface where there is intensive reflect lights or inverted images;
 The flight speed should not be too fast and the highest speed should be no more than 8m/s.
 The maximum flight inclination should not be more than 30°.
 The range of flight temperature is -10℃-55℃.
 The flight altitude should not be more than 4000 meters.
※
In Mode P and when the GPS signal is lost or not good enough, the system will turn to the visual and
acoustic positioning mode and no manual operation is needed.
※
This system is only open to ProDrone Byrd Advanced/Premium version.

Stowage Dropping

ProDrone Byrd could be loaded with loads less than 500g (not including the gimbal and the
camera) to eject objects from a long distance.
Before the ejection, the buttons C1 and C2 should be customized to choose the 'steering gear
control' in the APP setting interface (see Pxx for more details). The objects to be ejected are to be
put into the container carrier and the container is inserted into the steering gear hole. Operate the
aircraft to the place above the ejection point and press C1 or C2 button to let the container break
away from the aircraft. The ejection is finished.
9