Aircraft Preparation - ProDrone Byrd User Manual

Assembling

Aircraft Preparation

Unfold the aircraft arm and the food stools are unfolded to the limited places shown in the picture.
And make sure that the places after unfolding are in geometrical symmetry.
※
In unfolding, please control the strength of rotating the arm and the stool. Stop unfolding after they are
in the limited places.
※
In folding, please make sure the rotation is in the right direction. If it is in the wrong direction, the limit
structure would be damaged.
1. Propellers Installation and Dismounting
Foldable propeller is used in ProDrone Byrd. The two types of Propeller A and Propeller B are
corresponding to the different rotation directions of the motor.
Letters A and B are signed respectively on the root of the propeller, in the internal surface of the
propeller cap, and the motor rotor. Make sure signs of the three are the same in the installation and
dismounting.
In installation, choose the same type of propeller with that on the motor. Put the side with the
letter up and insert it to the spacer pin of the propeller in the electric motor. Press the performing
of the propeller to the card slot of the motor spindle in the direction vertical to the spacer pin.
Rotate the performing for 90° to align the hole sides at two ends with the spacer pin and press it in.
In the end, rotate the propeller cap according to the direction shown in the cap.
In dismounting, take down the propeller cap according to the direction shown in the cap. Lift the
propeller cap up slightly and rotate it for 90° to take down the performing. In the end, take down
the propeller.
 Anti-Shooting Propellers
The anti-shooting propeller serves as the second security assurance besides the self-locking design
24