Fiat ABARTH 500 2017 User Manual page 92

ELECTRONICS
Voice Command Tips
• Speaking complete names (i.e. Call John Doe vs. Call John) will result in greater
system accuracy.
• You can "link" commands together for faster results. Say "Call John Doe, mobile,"
for example.
• If you are listening to available voice command options, you do not have to listen
to the entire list. When you hear the command that you need, push the
button on the steering wheel, wait for the beep and say your command.
Changing The Volume
• Start a dialogue by pushing the Phone button
example, "Help".
• Use the radio VOLUME/MUTE rotary knob to adjust the volume to a comfortable
level while the Uconnect system is speaking.
NOTE:
The volume setting for Uconnect is different than the audio system.
NOTE:
To access help, push the Uconnect Phone button
"help." Push the Uconnect Phone Pickup button
cel" or push the Uconnect phone Hangup button
Incoming Text Messages
After pairing your Uconnect system with a Bluetooth enabled mobile device with the
Message Access Profile (MAP), the Uconnect system can announce a new incom-
ing text message and read it to you over the vehicle's audio system.
NOTE:
Only incoming text messages received during the current ignition cycle can be viewed/
read.
To enable incoming text messaging:
iPhone
1. Press the settings button on the mobile phone.
2. Select Bluetooth.
• Ensure Bluetooth is enabled, and the mobile phone is paired to the Uconnect
system.
3. Select located under DEVICES next to Uconnect.
90
, then say a command. For
on the steering wheel and say
or the VR button
to cancel the help session.
and say "can-