Table of Contents
Advertisement
Replacing the Batteries
The battery indicator on the display window shows the battery condition.
Notes
• Do not use manganese batteries for this unit.
• When you replace the batteries, insert the new ones within 3 minutes after you
remove the exhausted ones. Otherwise, the display may show the clock setting
display or incorrect date and time when you re-insert the batteries. In this
case, set the date and time again. The recorded messages and alarm setting,
however, will remain.
• Do not charge dry batteries.
• When you are not going to use the unit for a long time, remove the batteries to
prevent damage from battery leakage and corrosion.
Battery remain indication
: Replace both of the two batteries with new ones.
m
:
The "LOW BATT" (low
batteries) is displayed and the
unit will stop operation.
Battery life (Using Sony alkaline batteries LR03 (SG))
(Recording mode:)
In continuous recording:
In continuous playback:
* When playing back through the internal speaker with the medium volume
level
* The battery life may shorten depending on the operation of the unit.
Note on the "ACCESS" message
The unit is accessing data while "ACCESS" appears in the display window
or the OPR indicator flashes in orange. While accessing, do not remove the
batteries. Doing so may damage the data.
Note
If the unit is required to process excessive amount of data, "ACCESS" may be
displayed for an extended period of time. This is not a malfunction of the unit.
Wait until the message disappears before starting operation.
SP
Approx. 10 hours
Approx. 12 hours*
LP
Approx. 12 hours
Approx. 13 hours*
7
GB
Advertisement
Table of Contents
