Table of Contents
Advertisement
Troubleshooting (continued)
Error message
"NO DATA"
"NO ERASE"
"PRE SET"
"READ ONLY"
"SET DATE"
For the error messages of the "Digital Voice Editor", please refer to the
online Help files.
If an error message with a number is displayed
If the following error display appears, please consult your nearest Sony
dealer.
Error number Cause
"ERR 01"
"ERR 02"
"ERR 03"
"ERR 04"
"ERR 05"
62
GB
Cause/Remedy
•The selected folder does not have any messages.
You cannot set the alarm, etc. because of this.
•You cannot erase an index to combine messages
of different modes.
•You set the alarm to play back a message at a
date and time previously set on another
message. Change the alarm setting.
•Messages have been set to "Read-only" in the
computer. You cannot edit or erase messages
and folders including these "Read-only"
messages. Remove the check for "Read-only"
under "Properties" of files that are opened by
Windows Explorer.
•If you do not set date and time, you cannot make
alarm or time recording setting. To set date and
time, see page 8.
The IC recorder cannot access the memory or cannot
format the memory.
The IC recorder cannot write (record or erase) the data
in the memory.
The IC recorder cannot read the memory.
The IC recorder cannot load or write the settings.
An error other than the above occurs.
Advertisement
Table of Contents
