Table of Contents
Advertisement
Recording Messages (continued)
Notes
• While the OPR indicator flashes or turns in orange, do not remove the
batteries. Doing so may damage the data.
• When you connect an external speaker or a connecting cord to the EAR/MIC
jack, you cannot record from the built-in microphone. Disconnect the
speaker or cable.
• Noise may be recorded if an object, such as your finger, etc., accidentally rubs
or scratches the unit during recording.
3
Stop recording.
Other operations
To
pause recording*
release pause and
resume recording
12
GB
Press x x x x x STOP.
The unit stops at the beginning of the current recording.
If you do not change the folder after you stop recording,
the next time you record you will record in the same
folder.
Do this
Press zREC/REC PAUSE.
During recording pause, the OPR indicator
flashes in red and "PAUSE" flashes in the
display window.
Press zREC/REC PAUSE again.
Recording resumes from that point.
(To stop recording after pausing
recording, press xSTOP.)
Advertisement
Table of Contents
