Fujitsu l2010 User Manual page 80

It takes too long to retrieve the network and display the connected
computers
Countermeasure
Retrieve computers in the following procedure:
• In case of the Windows XP
1 Click "Start" button, then click "search".
2 Click "Computer or people".
3 Click "Computers on the network".
4 Input the name of computer to be connected with in "Computer name" and click "search".
5 Click the icon of connected computer.
Disconnected communication a few minutes after every connection to
the station
Countermeasure
Check the setting of the "Enable network access control using IEEE802.1X".
Critical Points
In case of restricting the access of wireless LAN clients using IEEE802.1X authentication,
put a check mark on "Enable network access control using IEEE802.1X". In case of home
use, remove a check mark on "Enable network access control using IEEE802.1X". For the
method of setting related with IEEE802.1X authentication, refer to the station manual.
Connection check with executed PING command
Check if IP packet has correctly reached the destination by executing PING command in the following
procedure:
Critical Points
In order to execute PING command, it is necessary to install TCP/IP protocol in advance.
64