ADC Advantage Fingertip 2200 Directions For Use Manual page 3

prescribed by your doctor.
C UTION: Excessive movement of the Advantage™ 2200 during measurement may cause inaccu-
rate readings. Limit finger movement as much as possible when using the device.
C UTION: The Advantage™ 2200 is not intended for continuous monitoring.
CAUTION: Do not place the Advantage™ 2200 on the same hand/arm when using a blood pressure
monitor.
C UTION: The Advantage™ 2200 has NO alarms. It will not sound if the amount of oxygen in your
blood is low or if the pulse rate is too high or too low.
C UTION: The Advantage™ 2200 readings may be adversely affected in the presence of high ambi-
ent light. Shield the device if necessary.
C UTION: Do not immerse the Advantage™ 2200 in liquid or clean with agents that are not listed in
this User' s Guide.
C UTION: Any of the following conditions may reduce the performance of the Advantage™ 2200:
• Very bright or flickering light
• Weak pulse
• Low hemoglobin
• Arterial catheters
• Nail polish and/or artificial nails
• Any tests recently performed on you that required the injection of intravascular dyes
C UTION: The Advantage™ 2200 may not function if you have poor circulation. Rub your fingers to
increase circulation or try an alternate finger if you are having trouble obtaining readings.
C UTION: Batteries can leak or explode if used or disposed of improperly. Remove the battery if the
Advantage™ 2200 will not be used for more than 30 days.
C UTION: Do not use the Advantage™ 2200 outside the specified operating and storage tempera-
ture ranges.
C UTION: Do not use the Advantage™ 2200 for more than 30 minutes without relocating the device
to another finger.
C UTION: Do not tamper with the Advantage™ 2200.
C UTION: Radios, cell phones or other similar devices may affect the Advantage™ 2200 and should
be kept at least 7 feet away from the device.
C UTION: Use in emergency vehicles with communication systems may affect the accuracy of the
Advantage™ 2200.
C UTION: Field strengths from fixed transmitters (radio, phone base stations, AM/FM radio or TV
broadcast towers) may affect the accuracy of the Advantage™ 2200.
C UTION: Follow local ordinances and recycling instructions regarding disposal or recycling of the
Advantage™ 2200 including batteries.
C UTION: The Advantage™ 2200 is a precision electronic instrument and must be serviced by
ADC' s service department.
Battery Installation (figure 1)
1. Slide off battery cover in direction of arrow.
2. Put the two AAA batteries into battery compartment by observing correct polarity.
3. Slide the battery cover on by reversing Step #1.