Playing Discs - Sony DVP-NC875V Service Manual

6 9
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
4:3 LETTER BOX
TV TYPE:
SCREEN SAVER: 4:3 LETTER BOX
BACKGROUND: 4:3 PAN SCAN
BLACK LEVEL: 16:9
BLACK LEVEL : OFF
(COMPONENT OUT)
4:3 OUTPUT: FULL
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 79)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 79)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
10
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
YES
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
NO
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 26 to
28 ( through ). Each of these is the
B D
default setting and does not need to be
adjusted when you first connect the player.
See page 77 for using the Setup Display.
Audio Connection (pages 26 to 28)
A
• No additional settings are needed.
B-1 C-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 82).
B-2 C-2 D-2
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 82).
• Set "DIGITAL OUT" to "ON" (page 82).
D-1
• Set "DISTANCE," "LEVEL (FRONT),"
and "LEVEL (REAR)" according to the
connected speakers (page 84).
z Hints
• For connections
B-2 C-2 D-2
Set "48kHz/96kHz PCM" to "96kHz/24bit," only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 83).
• For connections
B-1 C-1 D-1
If the sound distorts even when the volume is
turned down, set "AUDIO ATT" to "ON"
(page 81).
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 25 to
28 ( through ).
A D
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1 C-1
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
B-2 C-2 D-2
• Select "DIGITAL OUTPUT." The
Setup Display for "DOLBY DIGITAL"
appears.
or both and
D-1 D-1 D-2
• Select "DIGITAL & 5.1CH OUTPUT."
The Setup Display for "DOLBY
DIGITAL" appears.
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 26 to
28 ( through ).
B D
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
AUDIO FILTER: SHARP
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
ON
DOLBY DIGITAL: D-PCM
DTS: D-PCM
48kHz/96kHz PCM: DOLBY DIGITAL
B-2 C-2
• D-PCM (page 82)
D-2
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 82)
, 31
33
11
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 26 to
28 ( through ).
B D
B-2 C-2
• D-PCM (page 83)
D-2
• DTS (only if the amplifier (receiver)
has a DTS decoder) (page 83)
13
Press ENTER.
◆ When "DIGITAL OUTPUT" is selected
in step 9
• Quick Setup is finished and
connections are complete.
◆ When "DIGITAL & 5.1CH OUTPUT" is
selected in step 9
• The Setup Display for "SPEAKER
SETUP" appears.
14
Press X/x to select the size of the
center speaker.
If no center speaker is connected, select
"NONE" (page 83).
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
TEST TONE: OFF
FRONT:
CENTER:
REAR:
SUBWOOFER:
32

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
[/1
Z
H
1
Turn on your TV.
2
Press [/1.
The player turns on.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
34
1-7
DVP-NC875V
15
Press ENTER.
"REAR" is selected.
SPEAKER SETUP
SIZE:
OFF
DISTANCE:
STANDARD
LEVEL(FRONT) :
SHARP
LEVEL(REAR) :
TEST TONE: OFF
ON
FRONT:
D-PCM
CENTER: LARGE(REAR)
D-PCM
REAR: LARGE(REAR) LARGE(SIDE)
D-PCM
SUBWOOFER:
DTS
16
Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
"NONE."
17
Press ENTER.
"SUBWOOFER" is selected.
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
TEST TONE: OFF
FRONT:
CENTER:
REAR: LARGE(REAR)
SUBWOOFER:
18 ENTER
Press X/x to select whether or DISPLAY
not you have connected a
subwoofer.
19
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
LARGE LARGE
SMALL
LARGE
NONE
LARGE
YES
4
Press A on the player, and place a
disc on the disc tray.
To place other discs on the tray, press
DISC SKIP and place the discs in the
order you want to play them.
Each time you press DISC SKIP, the disc
tray turns so you can place the discs on
the empty compartments. The player
plays from the last disc placed on the tray.
H A
Disc
compartment
With the playback
number
side facing down
5
Press H.
DISC SKIP
The disc tray closes and the player starts
playback (continuous play). Adjust the
[/1
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
DISC SKIP
VIDEOs, see page 38. For VIDEO CDs,
see page 40.
To turn off the player
Press [/1. The player enters standby mode.
z Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
"AUTO POWER OFF" in "CUSTOM SETUP" to
"ON" or "OFF."
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT jacks.
LARGE
LARGE
YES
LARGE
LARGE YES
NONE
YES