Single Bracket - Sony ILCE-9 Instruction Manual

Single Bracket

Shoots multiple images while automatically shifting the exposure from
base to darker and then to lighter (bracket shooting). You can select the
image that suits your purpose after recording.
Since a single picture is taken each time you press the shutter button, you
can adjust the focus or the composition for each shot.
1
Select (Bracket) by turning the drive mode dial.
• Turn the drive mode dial while holding down the drive mode dial lock
release button.
2
MENU 
[Bracket Type]  [Single Bracket]  desired mode.
For example, three images are shot one by one with an exposure value
shifted by plus or minus 0.3 EV when [Single Bracket: 0.3EV 3 Image] is
selected.
• The setting screen for [Bracket Type] can be displayed by pressing the
Fn button.
3
Adjust the focus and shoot the image.
• Press the shutter button for each image.
Note
• When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is
changed by adjusting the ISO value. If a setting other than [ISO AUTO] is
selected, the exposure is changed by adjusting the shutter speed.
• When you adjust the exposure, the exposure is shifted based on the
compensated value.
• Bracket shooting is unavailable in the following situations:
– [Intelligent Auto]
(Camera Settings 1)  [Bracket Settings] 
GB
85