Sony ILCE-9 Instruction Manual page 193

To establish a Wi-Fi connection with a smartphone using
a QR code
 Select MENU 
[Ctrl w/ Smartphone] 
[ Connection Info.], to display
the QR code on the monitor of the
camera.
 Launch PlayMemories Mobile on the smartphone, and
select [Scan QR Code of the Camera].
 Scan the QR code.
Follow the steps below only if using an iPhone or iPad.
 Install the profile by following the instructions on the
iPhone or iPad screen.
 On the "Home" screen of the iPhone or iPad, select
[Settings]  [Wi-Fi].
 Select the SSID displayed on the camera.
 Return to the "Home" screen of the iPhone or iPad and
launch PlayMemories Mobile.
Hint
• Once the QR code has been read, this product's SSID (DIRECT-xxxx) and
password are registered to the smartphone. This enables you to easily
connect the smartphone to the product via Wi-Fi at a later date by
selecting the SSID.
Note
• If you cannot connect this product to a smartphone using the
NFC function or QR code, use the SSID and password. For detailed
instructions, refer to the "Help Guide."
(Network) 
GB
193