Controller Parameter Factory Default Settings; Heat-Up/Cool-Down Transition Times - Omega CL1000 Series User Manual

3.5 Controller Parameter Factory Default Settings

3.6 Heat-Up/Cool-Down Transition Times

This chart illustrates the approximate time required to make a transition
from one temperature to another in minutes. Once reaching the desired
temperature, the probe well must be allowed to soak at the new temperature
for a period of time to reach full stabilization.*
FROM
Figure 8. Approximate Probe Well Heat-Up/Cool-Down Transition Times
* First determine the current plate temperatures and go to the corresponding
row. Now decide the new target plate temperature and go to the appropriate
column. Note that there are X's along the diagonal to ensure the original and
target temperatures are the same.
LEVEL 1
TUNE OFF
BAND A 53
int.t A 3.3
der.t A 11
DaC A 4.0
CyC.t 9.7
OFSt 0
SP.Lk OFF
SP.rr 0
SPrn OFF
SoAK - -
SEt.2 0.0
bnd.2 N/A
CyC.2 N/A
Figure 7. Factory Default Settings
TO
38 (100) 93 (200) 149 (300) 204 (400) 260 (500)
38 (100)
93 (200) 50
149 (300) 60
204 (400) 65
260 (500) 70
CL1000 Series Operation
LEVEL 2 LEVEL 3
SP1.P 0 SP1.d
hAnd OFF SP2.d
PL.1 100 burn
PL.2 100 rEU.d
sp2.A nonE rEU.L
sp2.b nonE Span
di Sp 0.1 Zero
hi.SC 500.0 ChEK
lo.SC 32.0 rEAd
inPt rtd tECh
unit F UEr
rSEt
Temperature C (F)
12 13
13
25
30 15
35 25
Time (Minutes)
3
SSd1
SSd2
Up.SC
Ir.2d
In.2n
13
-0.5
oFF
VAr
Ct A
392
nonE
14 15
14 15
12 13
12
15
3-5