Power Management - Denon HEOS Owner's Manual

Contents

Power management

Power modes
o Quick Start Mode
To save power, the device will automatically enter "Quick Start Mode"
whenever there is no network access or playback for 20 minutes and
will automatically resume to full power whenever the device is selected
and playing music.
The status LED dims when the mode is switched to Quick Start Mode.
0 Press the Power button on the remote control unit to switch to Quick Start
Mode.
Setup Use Troubleshooting
o Deep Standby
The device also has the ability to automatically enter "Deep Standby"
whenever the wired and wireless network connections are removed for
more than 60 minutes in Quick Start Mode. Status LED will turn off
during Deep Standby.
To "wake" a HEOS device from Deep Standby, you must press the
power button on the remote control unit which will immediately turn on
status LED.
The Device may need to "find" the network before it can operate
properly.
NOTE
0 Please note that the HEOS cannot be operated as intended when in Deep
Standby as there is no network connection.
0 Press and hold the Power button on the remote control unit for more than 3
seconds to switch to Deep Standby.
o Off
To completely turn off the power to the device you must remove the
mains plug from the power outlet.
61
Status LED Appendix