Wall-Mounting - Denon HEOS Owner's Manual

Contents

Wall-Mounting

The HEOS Bar can be wall-mounted using the integrated keyhole mounts.
A mounting template can be found in the product carton. Using a level,
position and tape the template to the wall in the desired location. Install
hardware* using the template as a guide and then remove the mounting
template from the wall. Connect the audio and power cables prior to
mounting the HEOS Bar on the wall.
z Consult a person knowledgeable about your wall type to recommend suitable
hardware for hanging the speaker.
Setup Use Troubleshooting
NOTE
0 To ensure safety, request a contractor perform the mounting work when mounting
onto a wall.
0 In order to use the unit safely, do not place items on or hang items from the unit.
0 Be sure to fix connection cables to the wall to ensure that cannot be pulled or
tripped over causing the unit to fall. Check that the unit is mounted safely after the
mounting work is complete. Recommend installing a safety wire (not included) at
the safety wiring hole on the bottom of the HEOS Bar in order to prevent injury to
the user and others or damage to property should the HEOS Bar fall for some
reason.
0 Also, periodically check the safety of the unit and whether there is a possibility that
the unit may fall.
0 Denon cannot accept any responsibility for damage, injury or accidents caused by
problems with the mounting location or mounting method.
19
Status LED Appendix