Custom Setup - Olympus UFL-2 Instruction Manual

6. Custom Setup

Custom setup allows you to customize the electronic flash to suit your
preferences.
1 Press and hold the MODE button for more than 2 seconds, until the setup
mode display appears in the control panel.
2 Press the MODE button to select the setup mode.
3 Turn the dial to select the value.
4 Press and hold the MODE button for more than 2 seconds to confirm the
setup.
Setup mode
AF illuminator
Flash cable
Mode display Value display
MODE button
MODE button
Function
Dial
AF illuminator is
activated according
to the control from
the camera.
AF illuminator is
off.
Keep this option
set to ON at all
times.
EN
Default
value
A
on
EN 27