Connecting To A Pc; Horizontal Position; Vertical Position - Goodmans GML26W37HDF Instruction Manual

9.7-Connecting to a PC

Connect a monitor cable (15-way D-type)
cable between the PC and the PC-IN socket
on the main connections panel on the back
of your TV This cable isnot supplied. Also
connect a stereo cable (3.5mm plug at each
end) between the audio output of your PC to
TV MAIN CONNECTOR PANEL
PC IN
PC
VGA
AUDIO IN
9.7.1-Transition to the PC mode
For your LCD-TV to switch to the monitor
(PC) mode, press the SOURCE button on
your remote control. SOURCE menu will be
displayed. Select PC by pressing the Up/
Down navigation buttons and press the OK
button.
9.7.2-PC Access Setting
Enter into the SETUP menu from the Main
Menu by pressing the MENU button in the
PC mode. In order to make the necessary
settings in this menu, you can select the
headings with the Up/Down buttons on
your remote control to perform the following
monitor-related settings.
9.7.3-Auto Position
The most suitable geometric settings
in accordance with the entry mode are
configured by this function. For this operation,
just select the Autoposition tab and press
OK button.
the PC AUDIO-IN on the main connections
panel on your TV. This cable is only required
if you want to listen to sounds from your PC.
You can adjust the volume level using VOL+/
VOL- buttons.
AUDIO CONNECTION
PICTURE CONNECTION

9.7.4-Horizontal Position

Horizontal position setting.

9.7.5-Vertical Position

Vertical position setting.
9.7.6-Size
This is the pixel clock frequency. User can
narrow down or enlarge the display by
selecting a desired value.
9.7.7-Phase
Using the Right/Left navigation buttons, you
can ensure that the s and shapes are exactly
consolidated on the PC image.
9.7.8-PICTURE FORMAT
You can select the PC image to be displayed
in 16:9 or 4:3 formats.
29