Connecting Other Equipment - Goodmans TD1540 Operating Instructions Manual

CONNECTING OTHER EQUIPMENT

Connecting equipment to the VIDEO (audio-video) channel inputs means you do not have to tune it in
and there is almost no risk of electrical interference.
Press the TV/VIDEO button on the remote control repeatedly to select channel VIDEO 1 or VIDEO 2,
then TV program again.
VIDEO 1 Selects video and audio inputs on the rear scart (euro) connector. Used for direct
connection of cable or satellite receiver or games console. Use a scart cable for
VIDEO 1 input to the TV/DVD combi.
VIDEO 2 Selects video and audio inputs on the front of the TV/DVD combi. Used for connection
of camcorder or games console. Use an AV cable with RCA-style connectors.
Pin
1
Audio Output (linked with 3)
2 Audio Input (linked with 6)
Audio Output (linked with 1)
3
6 Audio Input (linked with 2)
8 Function switching (TV / AV)
RF input
Some equipment can be connected in the aerial cable path to the TV/DVD combi and a program number
can then be tuned to the equipment. Please see the instructions with your equipment for how to connect
up and produce a recognizable picture, then follow 'Manual Tuning' on page 14.
Picture distortion and interference happen if the equipment uses the same output frequency as a
broadcast or some other equipment. In this case see the instructions for the equipment to find out how
to change its output frequency, then repeat 'Manual Tuning' on page 14.
Description Pin Description
17 Earth (video out)
Earth (video in)
18
Video and synchronisation output
19
Video and synchronisation input
20
21 Earth (case)
Pins 4,5,7,9,10,11,12,13,14,15 and 16 are not used.
PAGE 7