2.
Tap the location that you want to select as your destination. The cursor (
3.
(optional) If needed, tap
Tip!
If you already have a planned route, tap
location to your route.
4.
Tap
5.
The route is calculated and the map appears showing the entire route, where you can check route
information and route alternatives. Tap
3.1.9 Planning a Multipoint Route
To build your route destination-by-destination, perform the following steps:
1.
Tap
on the Navigation view to access the Navigation menu.
2.
Tap
.
3.
There is only one line in the list of route points, the starting point of the route, which is normally the
current GPS position.
to list the Places near the selected point or to save this location.
to select the cursor as the destination.
to start your journey.
and
to modify the route parameters, or tap
49
) appears there.
to add the selected