Operation - Bosch MSM6***GB Instruction Manual

en
English

Operation

W Risk of injury from sharp blade!
The universal cutter must be completely
assembled before use! Never grip the blade
in the universal cutter. Take hold of the
universal cutter blade by the plastic handle
only. Do not touch blade with bare hands.
Clean them with a brush.
Universal cutter with blade
The universal cutter with cutter blade is
suitable for cutting meat, hard cheese,
onions, herbs, garlic, fruit, vegetables, nuts,
almonds. With the universal cutter XL use
the appliance at full power to prepare honey
spread (according to the recipe see Fig. E).
Always observe the maximum quantities
and processing times in the table (Fig. E).
Caution!
Before cutting meat, remove gristle, bones
and sinews. The universal cutter with cutter
blades is not suitable for cutting very hard
food (coffee beans, radishes, nutmeg) and
frozen food (fruit, etc.).
X Fig. B
with cutter blade (sizes L and XL)
X Fig. C
with ice crusher blade (size L only)
■ Place the universal cutter on a smooth,
clean work surface and press.
■ Insert the blade.
■ Add food.
Warning!
Blade must sit straight in the universal
cutter so that the attachment sits correctly
(Fig. B / C-3).
■ Place the attachment on the universal
cutter and rotate in a clockwise direction
until it "clicks" into position.
■ Place the base unit on the attachment
and lock into position.
■ Insert the mains plug.
■ Hold the base unit and universal cutter
firmly and switch on the appliance
(turbo speed).
■ Release the ON button after processing.
4
After using the appliance
■ Remove mains plug.
■ Press the release buttons and remove
the base unit from the attachment.
■ Rotate the attachment in an anti-clock-
wise direction and remove from the
universal cutter.
■ Take hold of the blade by the plastic
handle and take out.
■ Place the lid on the universal cutter to
keep in the processed ingredients.
Universal cutter with
Vario set (only size XL)
The universal cutter with Vario set is
suitable for cutting hard, dry food (e.g.
chocolate, nuts, almonds, Parmesan) or for
crushing ice cubes into small (S), medium
(M) or large (L) pieces. The size is specified
by positioning the marks S, M or L on the
Vario filter insert when inserting it into the
Vario holder.
Information and recommendations con-
cerning settings, quantities and processing
times can be found in the table (Fig. E).
X Fig. D
■ Place the universal cutter on a smooth,
clean work surface and press.
■ Insert Vario holder into the universal
cutter. Pegs on the universal cutter must
be located in the grooves of the holder.
■ Place Vario filter insert on the universal
cutter. The marks S/M/L must be posi-
tioned above the peg of the universal
cutter according to the required degree
of cutting (Fig. D-2).
■ Insert Vario blade.
■ Add food.
Warning!
Vario blade must sit straight in the Vario
filter insert so that the attachment sits cor-
rectly (Fig. D-3a).
■ Place attachment on the Vario filter
insert and turn clockwise until it clicks
into position.