Table of Contents
Advertisement
3. Use
to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for two minutes.
symbol and the time setting flash in the
display. The appliance deactivates.
4. Touch a sensor field to stop the
acoustic signal.
5. Deactivate the appliance.
7.5 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a
countdown (maximum 2 h 30 min). This
function has no effect on the operation of
the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
1. Touch
and "00" flash in the display.
2. Use
MINDER. First you set the seconds,
then the minutes and the hours.
3. Touch
to reset the set time.
8. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
8.1 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
or
to set the END and
.
or
to set the MINUTE
and
at the same time
4. Touch
or the MINUTE MINDER
starts automatically after five
seconds.
When the set time ends, an acoustic
signal sounds for two minutes and 00:00
and
flash in the display.
5. Touch a sensor field to stop the
acoustic signal.
7.6 Setting the Time delay
function
The DURATION
used at the same time, if the appliance is
to be switched on and off automatically
later. In this case, first set the
DURATION
and then the END
function (refer to "Setting the
DURATION" and "Setting the END" ).
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
with a dot and
dot shows which clock
function is on in the Clock /
residual heat display.
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
ENGLISH
13
and END
can be
. The
Hide quick links:
Advertisement
Table of Contents
