Blocking Log - D-Link DFL-600 Manual

Intrusion Type
Source: port
Destination: port

Blocking Log

Certain sessions between computers on your LAN and the WAN have the
potential to cause a disruption in the function of your computers and are
blocked by the DFL-600's firewall. Some of these session types are defined
by you under on the Port Filter Policy page, under Policy Settings from the
Advanced Settings tab. Events blocked (attempts to connect to computers
on your LAN, between computers on your LAN, or between computers on
your LAN and the WAN) because they met the criteria you entered on the
Port Filter Policy page, are recorded here, in the Blocking Log, as shown
below:
A brief statement of the type of intrusion that
was attempted is displayed here.
Displays the source IP address and the
TCP/UDP port that the intrusion was attempted
from.
Displays the destination IP address and the
TCP/UDP port that the intrusion was attempted
to.