2.
Press
F3
(STEP) to access the Step and Nudge Grid settings.
3.
Use the Right Arrow button under the display to select the
tom of the display:
4.
Turn the Control encoder to select the desired Nudge Grid resolution.
The new Nudge Grid resolution is directly in use — provided that the Step Grid is ena-
→
bled (see above).
7.2
Recording Patterns in Real Time
This section describes the various ways, features, and aids available on your controller to re-
cord Patterns as you play them in real time:
▪ The most common method is called overdub recording. Alternatively you can use replace
recording. Both are described in section
▪ Right before you record a new Pattern, you can quickly enter Record Prepare mode to ad-
just a few important settings for your Pattern:
▪ At any time you can enable and customize the metronome:
▪ You can also start the recording with a count-in:
▪ While recording you can let MASCHINE automatically quantize what you play on the pads:
↑7.2.5, Quantizing while
↑7.2.1, Recording Your Patterns
↑7.2.2, The Record Prepare
Recording.
NUDGE
parameter at the bot-
↑7.2.3, Using the
↑7.2.4, Recording with
MASCHINE MIKRO - Manual - 327
Working with Patterns
Recording Patterns in Real Time
Live.
Mode.
Metronome.
Count-in.