Advertisement
MultiUART COM port demo quickstart guide
Figure 2:
Full system
setup for
MultiUART
demo
1.4 Run the application
1. Open the configured terminal client application console on the host computer
2. Click on the Run icon (the white arrow in the green circle) and wait for the
application running message in xTIMEcomposer Studio console for all UARTs
before proceeding to the next step.
3. A user menu will be displayed on terminal client application console
4. Key in e to enter echo mode. Type in any character from thekey board and
application echoes the key pressed. In order to get back to user menu, press
Esc key.
5. Key in r to enter reconfiguration mode. Select a new baud rate value (choose
1 for 115200 baud, 2 for 57600 baud, 3 for 9600 baud and 4 for 600 baud
REV A
6/8
Advertisement
