Creating Static Ipv6 Or Dynamic Ipv6 Wan Connection - D-Link DIR-825/AC User Manual

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual

Creating Static IPv6 or Dynamic IPv6 WAN Connection

To create a connection of the Static IPv6 or Dynamic IPv6 type, click the Add button on the Net /
WAN page. On the opened page, select the relevant value from the Connection Type drop-down
list and specify the needed values.
Figure 86. The page for creating a new Static IPv6 connection. The General settings section.
Parameter
Provider
Interface
Name
Enable
Direction
General settings
Leave the Manually value.
A physical or virtual interface to which the new connection will be
assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 110 of 257
Configuring via Web-based Interface
Description