Chapter 3. Installation And Connection; Before You Begin - D-Link DIR-825/AC User Manual

Wireless ac1200 dual band gigabit router with 3g/lte support and usb port
Hide thumbs Also See for DIR-825/AC:
Table of Contents

Advertisement

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
CHAPTER 3.

Before You Begin

Please, read this manual prior to installing the device. Make sure that you have all the necessary
information and equipment.
Operating System
Configuration of the wireless dual band gigabit router with support of LTE, 3G GSM and CDMA
DIR-825/AC
(hereinafter referred to as "the router") is performed via the built-in web-based
interface. The web-based interface is available from any operating system that supports a web
browser.
Web Browser
The following web browsers are recommended:
Apple Safari 5 and later
Google Chrome 10 and later
Microsoft Internet Explorer 9 and later
Microsoft Edge 20.10240 and later
Mozilla Firefox 10 and later
Opera 10 and later.
For successful operation, JavaScript should be enabled on the web browser. Make sure that
JavaScript has not been disabled by other software (such as virus protection or web user security
packages) running on your computer.
Wired or Wireless NIC (Ethernet or Wi-Fi Adapter)
Any computer that uses the router should be equipped with an Ethernet or Wi-Fi adapter (NIC). If
your computer is not equipped with such a device, install an Ethernet or Wi-Fi adapter prior to using
the router.
Wireless Connection
Wireless workstations from your network should be equipped with a wireless 802.11a, b, g, n, or ac
NIC (Wi-Fi adapter). In addition, you should specify the values of SSID, channel number and
security settings defined in the web-based interface of the router for all these wireless workstations.
INSTALLATION AND CONNECTION
Page 19 of 257
Installation and Connection

Advertisement

Table of Contents
loading

Table of Contents