Sanyo PLV-55WM1 Service Manual page 34

Mechanical disassemblies
19 19
-1 Opti -1 Optical parts removal.
al parts remova
1 Re 1. Remove the optical parts upward.
19
-2 Optical reflector removal.
1. Remove the 4 screws A (T4 x 14), and remove the Optical reflector.
l
Note:
Do not touch the optical parts surface directly
with hand.
Mark the optical parts as they are removed from
the optical unit so that they may be reassem-
bled in the same location from which they were
removed removed.
y
A
A
A
A
- 34 -
Fig. 19-1
OPTICAL REFLECTOR
Fig. 19-2 Fig. 19-2