IBM OPTIONS User Manual page 11

12. Mount and connect each internal SCSI device in your computer. Connect
the 68-pin cable into the connector for 16-bit Wide SCSI devices (J1 in the
illustration of the adapter).
13. Connect the internal devices to available connectors starting at the end of
the SCSI cable farthest from the adapter and closest to the terminator to
ensure best signal quality. For each device connect pin-1 on each cable
connector to pin-1 on each device, otherwise your SCSI devices will not
work correctly.
14. You can connect a light-emitting diode (LED) to indicate SCSI hard disk
drive activity. Unplug the LED cable from the connector on the computer
system board. Connect the LED cable connector to the external LED
connector on the SCSI adapter (J3 in the illustration of the adapter).
15. Connect the power cable for each device to the internal power source, as
needed. Replace and secure the cover on your computer.
16. If you have external SCSI devices, connect your external SCSI cable (not
provided with this option) to the external connector on the SCSI adapter
(J5 in the illustration of the adapter) and then connect your external
devices.
17. Reconnect the power cord and other cables. Turn on all attached devices;
then turn on your computer. If your computer does not recognize the SCSI
adapter, start your configuration program and review and set the
configuration options.
18. The initial SCSISelect adapter settings work for most computers with PCI
expansion slots. If you need more information about changing the initial
settings, see "Appendix B. Using SCSISelect" on page B-1.
19. Install the device driver and utility software.
The Microsoft
®
NT Workstation, Novell NetWare, IBM OS/2
operating systems might already contain device drivers for your SCSI
adapter. If this is the case, your operating system will recognize the device
after installation and will use the appropriate device drivers. If your
operating system does not recognize the SCSI adapter after installation,
you will need to use the option CD to install the appropriate device
drivers.
Device drivers for the adapter are included in the EZ-SCSI software
package which contains device drivers for the following operating
systems:
v Windows 95, Windows 98, Microsoft Windows Millennium (Me)
v Windows NT 4.0
The Family Manager software package contains device drivers for the
following operating systems:
v Windows 95, Windows 98, Microsoft Windows Professional 2000
® ®
Windows 95, Windows 98, Microsoft Windows
® ®
, SCO UNIX , and UnixWare
Part 1: Quick installation guide
1-3