Makita 6823 Technical Information page 9

W
iring
(6823)
Wiring in upper part of switch
Hold Lead wire (black) connecting field
and switch in the lead holder.
Hold Lead wire (red) of
brush holder in the lead holder.
Slack of the lead wires
has to be limited in this area.
Wiring in lower part of switch
When installing noise suppressor,
set it as per the illustration.
Hold lead wire (black) of field
in the lead holder.
Hold lead wire (black) of field
and the same (blue) of brush holder
in the lead holder.
Hold lead wire (black) of field
and the same (white) of switch
in the lead holder.
When setting lead wires,
be careful not to pinch it in
the rib of terminal block.